Tel+86 17621197907Serving 56+ countries
RICEWIND

Heda / System Controllers & Monitoring Units (SMU/CSU)

EPMU03 Equipment information & support

The Heda EPMU03 is a carrier-grade industrial central supervisory monitoring unit engineered for telecom -48V DC power and environmental supervisory systems, providing real-time acquisition and control over distribution panels, rectifiers, and battery plants.

Equipment information

Brand
Heda
Equipment model
EPMU03
Equipment type
System Controllers & Monitoring Units (SMU/CSU)
Controller / software version
Confirm against the installed equipment
View full product specifications
Heda EPMU03 Pure White Background Hardware Shot 1

Information below comes from the current product catalogue. Confirm the controller, software version and configuration of the installed equipment separately.

System Nominal Voltage
48V DC
Communication Interfaces
RS485, RS232
Supported Protocols
Modbus, Heda Protocol
Display Interface
LCD Screen with Multi-Language Operator UI
Operating Temperature Range
-40°C ~ +75°C
Hot-Swappable Support
Yes (Live Hot-Pluggable / Plug-and-Play without Power Interruption)

Alarms & troubleshooting

CAN_BUS_OFF / NODE_TIMEOUT (Controller CAN Bus Interface Lost / Node Timeout)
Controller front panel red ALARM LED steady ON; display flags bus communication offline; rectifiers operate autonomously.
Subrack communication ribbon cable disconnected, high EMI interference on CAN lines, transceiver IC fault, or open termination resistor.
1. Reseat controller module and reconnect subrack ribbon cables; 2. Measure DC voltage on CAN_H and CAN_L (nominal ~2.5V differential); 3. Ensure communication cabling is isolated from high-power AC cables; 4. Reboot controller unit to perform bus re-initialization; 5. If communication remains offline, replace controller unit.

Access Complete Maintenance & Full Alarm Troubleshooting Manual

This page lists high-frequency critical alarm codes commonly encountered in field maintenance. Comprehensive manufacturer troubleshooting matrices, board-level repair guides, detailed electrical schematics, and firmware commissioning manuals are delivered alongside equipment upon formal project procurement, accompanied by dedicated FAE technical support.

Contact Account Manager for Full Manual

Share on-site information

  1. 01

    Identify the exact model

    Record the nameplate, system model and controller or module model.

  2. 02

    Keep the alarm details

    Record the full alarm text, indicator colour, timing and whether it persists.

  3. 03

    Describe recent changes

    Note recent replacements, software updates or configuration changes.

Record information visible in the existing interface. Electrical measurements, disassembly and replacement should follow the applicable manufacturer's manual and be performed by qualified personnel.

Your model and these details will be added to the enquiry form for you to review before sending.

Related technical articles

Browse the technical guides or send a question about this model.

View all articles

Need a replacement module or supporting equipment?

Confirm the full model, system configuration and compatibility requirements before enquiring about suitable products.

Ask about suitable products

Have a model and an on-site issue?

Share the exact model, alarm text and observed symptoms to help identify relevant information and compatibility requirements.

Request technical support