81EG8E Equipment information & support
RICEWIND Huawei 81EG8E 8-Port Gigabit Ethernet Processing Board (OptiX OSN GE L2 Switching)
Equipment information
- Brand
- Huawei
- Equipment model
- 81EG8E
- Equipment type
- SFP / SFP+ Optical Transceivers
- Controller / software version
- Confirm against the installed equipment
Information below comes from the current product catalogue. Confirm the controller, software version and configuration of the installed equipment separately.
- 2x 10GE Optical Ports (10GBASE-LR/ER/ZR)
- 8x 1000BASE-X SFP / 1000BASE-T Ports
- EPL / EVPL / EPLAN / EVPLAN L2 Switching
- EPL / EVPL / EPLAN / EVPLAN L2 Switching
- Huawei OptiX OSN 1500 / 2500 / 3500 / 7500
- Huawei OptiX OSN 1500 / 2500 / 3500 / 7500
- GFP (ITU-T G.7041) / LAPS / HDLC Protocols
- GFP (ITU-T G.7041) / LAPS / HDLC Protocols
- Typical 38W (Independent Thermal Shroud)
- Typical 28W (Line-Rate Packet Processing)
- 0°C to +45°C Telecom Equipment Room
- 0°C to +45°C Telecom Transmission Room
Alarms & troubleshooting
No public alarm guide is available for this model yet
Share the original alarm text and controller version to help identify applicable documentation. Alarm definitions and procedures may vary by version.
Share on-site informationShare on-site information
- 01
Identify the exact model
Record the nameplate, system model and controller or module model.
- 02
Keep the alarm details
Record the full alarm text, indicator colour, timing and whether it persists.
- 03
Describe recent changes
Note recent replacements, software updates or configuration changes.
Record information visible in the existing interface. Electrical measurements, disassembly and replacement should follow the applicable manufacturer's manual and be performed by qualified personnel.
Related technical articles
Browse the technical guides or send a question about this model.
View all articlesNeed a replacement module or supporting equipment?
Confirm the full model, system configuration and compatibility requirements before enquiring about suitable products.
Have a model and an on-site issue?
Share the exact model, alarm text and observed symptoms to help identify relevant information and compatibility requirements.